Flexible Enough For Cutting: This Daytime Running Light is flexible that allows you to shape it as you like, Only 4mm thickness, can be installed inside the slit to create a better effect.
Easy Installation: No aluminum, No drill. Silicone body, fully sealed, do not worry about rust. Just peel and stick it by using reliable Self-Adhesive Genuine tape.
Switchback Function: Greatly enhances lighting in rainy & foggy days to avoid traffic accidents, when switched to amber yellow color, it can be as a turn signal light with water flowing running effect.
Waterproof: The LED strips adopt a waterproof buckled plug designed with short circuit protection for more safe driving, anti-collision and anti-corrosion LED light tubes.
- Low Consumption: High luminous efficiency with high brightness light output, error-free widely used for Car, SUV, Vans, Truck, RV, Motorcycle, Scooter, Trailer, etc. (12V Voltage)
- Weight: 163g.
- Main Material: Soft Silicone.
- Type: Daytime Running Light.
- Color: Switchback ( White / Blue / Red / Amber)
- Voltage: 12V DC Watt: 25W.
- Tube Dimension: 60 / 45 X 1.8 X 1.2 CM.
- Function: White Daytime Running Lights / Yellow Turn Signal Lights.
- Not a plug and play product, some professional skills and tools are needed.
- (Professional Operation) Can be cut as your need at each 3 LEDs position, you must count from the first LED (from the end).
- Please put some plastic insulation immediately once done, or it will be a short circuit (IMPORTANT).
- 3 LEDs are a section, cut at least one section once time, one section is about 15cm.
45cm only has 3 sections, if you cut off, the sequential dynamic lighting is not so good.
- It can be bent up to 90 degrees, but cannot be folded or beat arbitrarily, the LEDs inside will be damaged.
- Need to open/break the headlights cover to install.
- 2 x Daytime Running Light.
- Due to the different monitor and light effects, the actual color of the item might be slightly different from the color showed on the pictures.